# Personal Globus Endpoint Install

**URL:** <https://ask.cyberinfrastructure.org/t/personal-globus-endpoint-install/2460>\
**Category:** Kentucky Cyberteam\
**Tags:** file-transfer, globus, data-transfer\
**Created:** [August 17, 2022, 3:18pm UTC](https://ask.cyberinfrastructure.org/t/personal-globus-endpoint-install/2460 "2022-08-17T15:18:47Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![tylerbrianburkett](https://ask.cyberinfrastructure.org/user_avatar/ask.cyberinfrastructure.org/tylerbrianburkett/32/732_2.png) [@tylerbrianburkett](https://ask.cyberinfrastructure.org/u/tylerbrianburkett)\
**Post date:** [August 17, 2022, 3:18pm UTC](https://ask.cyberinfrastructure.org/t/personal-globus-endpoint-install/2460/1 "2022-08-17T15:18:47Z")

</div>

For the free version of Globus, you will need to setup a personal endpoint on any personal computers if you want to transfer files between them and a larger Globus endpoint. This personal endpoint will appear like a normal endpoint on the Globus file manager page.

# Installation

Globus Personal is available for Mac, Windows, and Linux. This guide will focus primarily on installing on a Linux machine.

1. Download Globus Connect Personal .tgz file: [https://app.globus.org/file-manager/gcp](https://app.globus.org/file-manager/gcp)  

2. Extract the .tgz file and cd into the new directory to run Globus Connect Personal Setup. This

## Graphical Install/Run

1. Install Tcl/Tk to use the graphical interface to manage the endpoint after installation

2. Run the Globus Connect Personal command as follows to begin setting up a personal endpoint.

3. Proceed through the graphical prompts to create a personal Globus endpoint for you computer.  

4. At this point, you can now run the Globus Connect Personal command again to start up the connection from your files to Globus.

## CLI Setup

1. Run the Globus Connect Personal command as follows to perform setup on the command line.

2. You will be prompted to enter a URL into a browser to authenticate. Enter the code on the command line after authentication to create the endpoint.  

3. To connect and disconnect your personal endpoint to Globus respectively, run the following commands.

# Viewing endpoint on globus

After connecting to Globus, you should be able to go to you Globus account, find your personal collection in the file manager, and open it to see your files.

 ![Globus-Personal-Collection](https://ask.cyberinfrastructure.org/uploads/default/original/1X/eeddb6cc14a40ce66167e8c28b2e0d765c2ff000.png)  
 ![Globus-Personal-Fileview](https://ask.cyberinfrastructure.org/uploads/default/original/1X/ddba28b89dac92c3afa0ffa00e19308c60e10683.png)

Note that for the CLI method, your endpoint name will be “ogui”. You can edit this by clicking on the triple-dots to the right side.

 ![globus-personal-2](https://ask.cyberinfrastructure.org/uploads/default/original/1X/9a6eb63f2100a473ba0b548b63e9d59f46fdbfd4.png)

At this point, you can work with your files like any other Globus collection and transfer files on your computer to other collections.

For more information, visit the links below:

- Globus Connect Personal site: [Globus Connect Personal](https://www.globus.org/globus-connect-personal)